Skip to content Skip to sidebar Skip to footer
Inicio / Why Did the Cis Never Use Ion Cannons Again

Why Did the Cis Never Use Ion Cannons Again

Publicar un comentario

The following is a listing of scientific discipline-fictional Star Wars starfighters. Inside the Star Wars setting, a starfighter is defined as a "minor, fast, manevuerable, and heavily armed starship used in direct confrontations betwixt opposing forces."[1] In addition to appearing in the saga's movies and TV series, several LucasArts games describe the role player equally a starfighter pilot.

In the Star Wars universe, starfighters are equipped with the same fictional technology found on other starships. Sublight drives propel starfighters at below lightspeed velocities, with the most mutual blazon being the ion engine.[2] These engines are used to lift off from planetary surfaces, travel in deep space and appoint other starships in space battles, while inertial dampeners protect the occupants from forceful accelerations.[1] [3] Repulsorlifts are carried as secondary drives for atmospheric flying and when docking or making planetary landings.[1] [four] Some starfighters are also equipped with an internal hyperdrive or connect to an external hyperdrive unit for faster-than-light travel.[5] The principal weapon on most starfighters are laser cannons,[six] with boosted weapons similar proton torpedoes boasting additional firepower.[7] Some starfighters are also equipped with deflector shields which tin can exist adapted to protect specific areas of the send.[8]

Starfighters appearing in the Original Trilogy [edit]

A-wing [edit]

The Kuat RZ-1 A-wing Interceptor is a grade of starfighter, depicted equally fast but frail interceptors of the Rebel Alliance, conceived for high-speed surgical strikes, deep reconnaissance and escort fighter duty.[nine] A-wings first appear in Render of the Jedi (1983) during the climactic Battle of Endor. It gained popularity through its depiction in several video games, such as Battlefront II and 2015 Battlefront, and has been merchandised past several companies.

B-wing [edit]

A/SF-01 B-wing starfighter
Star Wars vehicle
First advent Render of the Jedi (1983)
Created past Slayne & Korpil
Information
Amalgamation
  • Insubordinate Alliance
  • New Democracy
General characteristics
Class Heavy assault starfighter[10]
Armaments
  • ArMek SW-7a ion cannons (3)
  • Gyrhil R-9x laser cannons (one-4)
  • Gyrhil 72 twin autoblasters (1)
  • Krupx MG9 proton torpedo launchers (2)
  • Proton torpedoes (8-12)
  • Prototype beam weapon (optional)
Defenses
  • Sirplex Zr-41 deflector shield generator
  • Sensor jammer
Maximum speed
  • ii,390 1000 (maximum acceleration)
  • 950 km/h (590 mph; maximum atmospheric speed)
  • 91 MGLT (megalight per hour; subluminal speed)
  • 1.0 HCR (hyperdrive class rating; superluminal speed)
Propulsion
  • HYd-997 hyperdrive motivator (1)
  • Quadex Kyromaster engine with four thrusters
Length 16.9 meters (55 ft 5 in)
Width 2.9 meters (nine ft 6 in)
Height
  • S-foils airtight: 2.5 meters (8 ft i in)
  • S-foils open: 7.3 meters (23 ft 11in)
Population book
  • 1 airplane pilot

The A/SF-01 B-fly starfighter is a fictional Rebel Alliance and New Republic starfighter. They starting time appear in Return of the Jedi (1983) and subsequently in the Star Wars expanded universe's books, comics, and games. It is commonly depicted as a heavy strike fighter. A diversity of B-wing trade has been released by toy companies.

Origin and design

Although initial plans called for B-wings to appear in several scenes, its narrow appearance from some angles made it hard to see confronting the properties of space.[eleven] The send's rotating cockpit stems from an initial pattern for the Millennium Falcon.[11]

Depiction

The B-wing's canonical origin (as the Blade Wing), as-designed by the Monday Calamari engineer Quarrie,[12] is depicted in the Star Wars Rebels second season episode "Wings of the Master" (in the previous Legends continuity, Admiral Ackbar helped design the B-wing[thirteen]). Quarrie designed the Blade Fly to be a blockade buster for the Rebel Alliance, combining aspects of previous ships built by the Verpine Slayne & Korpil corporation including the V-xix Torrent starfighter, H-60 Storm bomber and T-6 shuttle. While Quarrie's Blade Fly helped the crew of the Ghost escape an Imperial blockade, the prototype was plagued with a number of technical challenges. Senator Bail Organa was responsible for convincing Slayne & Korpil to work with Quarrie to fix these issues and create a production model, the A/SF-01, for the Rebel Alliance.[x]

The A/SF-01 was the most well-armed starfighter in the galaxy at the time information technology was introduced; a unmarried B-wing was capable of attacking and destroying enemy capital ships. Withal it was also slower and less maneuverable than whatever other Rebel starfighter and required the virtually maintenance. The B-wing'south gyrostabilized cockpit allowed the pilot to maintain a consistent horizon while the craft'due south body rotated effectually it, minimizing g-stresses on the pilot and letting them concentrate on flying and targeting. However, if the gyro-stabilization organisation was not kept in prime status, information technology could neglect nether the tremendous force per unit area and lock up. The B-wing featured S-foils like in function to those of the Ten-wing fighter.[10] [14]

Merchandise

Both Kenner and Hasbro released B-wing toys,[15] [16] the B-wing is part of two Micro Machines three-packs,[17] [eighteen] and Lego has made several B-wing sets.[19] [xx] [21] A Micro Machines Alpha Armada packet includes models both of the B-wing'due south moving picture appearance and of an initial production blueprint.[22] Decipher and Wizards of the Coast published B-wing cards for the Star Wars Customizable Card Game and Star Wars Trading Card Game, respectively.[23] [24] The second expansion pack for the 10-Wing flying simulator, B-Fly, introduces the B-wing as a playable starfighter; several other LucasArts products likewise describe B-wings.

Necktie fighter (and variants) [edit]

TIE fighters—and variants such as Tie interceptors and Necktie bombers—appear throughout the original trilogy. They are normally not equipped with shields or a hyperdrive, which makes them mass-producible and allows for considerable weapon payloads, or alternatively, for high speed and agility. The pilot has to wear a pressurized suit, equally Tie fighters also lack life support systems.

X-wing [edit]

The X-wing starfighter, named for the distinctive shape made when its S-Foils are in assail position, was a class of starfighter used by the Insubordinate Alliance in their disharmonize with the Galactic Empire. Information technology made its theatrical debut, every bit the T-65B model, in Star Wars (1977) as the spacecraft piloted by Luke Skywalker and the Ruddy Squadron when Luke destroyed the Death Star. The starfighter featured extensively in the Star Wars original trilogy and in the Expanded Universe that followed, and has been merchandised equally a variety of toys and models. It is commonly depicted as an aerospace superiority fighter with a secondary capability as strike fighter.

Y-wing [edit]

The Y-wing assault starfighter/bomber are depicted as the primary fighter-bombers of the Galactic Democracy, Rebel Brotherhood, New Republic, and the Resistance; being ideally suited for anti-shipping, close air support, and ground attack missions. They made their theatrical appearance in Star Wars Episode IV: A New Hope (1977) and have featured in movies, boob tube shows, and the Star Wars expanded universe's books, comics, and games.

Starfighters appearing in the Prequel Trilogy [edit]

ARC-170 [edit]

The ARC-170 starfighter or Aggressive ReConnaissance-170 starfighter were flown by clone pilots of the Galactic Republic during the Clone Wars. They first appear in the opening battle sequence of Star Wars: Episode III – Revenge of the Sith (2005) and have featured in the 2008 Clone Wars tv set series.[25] The fighter'southward name stems from "ART 170", the file name of the art that established the ship's advent; during scripting information technology was but referred to equally the "Clone Fighter."[26]

Co-ordinate to background material, the ARC-170 is a rugged and versatile starfighter that tin can fulfill a diverseness of roles. A joint venture betwixt the Incom and Subpro corporations, the ARC-170 measures 14.5 m (48 ft) long, with a wingspan of 22.six m (74 ft) and summit of four.78 m (15.seven ft).[27] Its crew includes a airplane pilot, a co-airplane pilot/forwards gunner, a tail gunner, and an astromech droid to act every bit navigator and brand repairs.[27] [28] With its hyperdrive and v day's worth of supplies, the ARC-170 tin operate deep behind enemy lines, where the variety of scanners and sensor jammers in its heavy olfactory organ help information technology conduct unsafe scouting missions. Its weaponry includes a pair of forwards-facing medium laser cannons, mated with targeting rangefinders, which are powerful enough to punch through capital ship armor plating; two aft-facing laser cannons for staving off pursuing starfighters; and six proton torpedoes which allow it to conduct bombing missions.[27] [28] Deflector shielding protects the fighter from enemy attack and allows information technology to attain hypersonic speed in an atmosphere past dispersing the heat created from air friction.[27]

Later the end of the Clone Wars, the ARC-170 would continue to serve under the Galactic Empire until replaced in favor of the Tie Fighter.[27] It would as well serve as the in-universe inspiration for Incom's adjacent starfighter, the X-wing. Like the X-wing, the ARC-170 features S-foils, which open up during gainsay to shed waste heat, overstate the starfighter's deflector shields, and function as stabilizer surfaces during atmospheric flight.[27] [29]

Droid Tri-Fighter [edit]

A pair of Droid Tri-Fighters during the Battle of Coruscant

Droid Tri-fighters are droid starfighters used past Separatist forces during the Clone Wars. They fabricated their first theatrical appearance in the opening boxing of Revenge of the Sith (2005). Original plans to equip the fighters with boosters were abandoned when Lucas decided they were an unnecessary distraction in the already chaotic scene. Its curved braces are deliberately reminiscent of the Trade Federation's circular battleship.[thirty]

The tri-fighter is a compact and heavily armed starfighter with three arms surrounding a rotating gyroscopic cadre. Measuring 5.4 yard (18 ft) long, with a one.96 thou (vi ft 5 in) wingspan and three.45 thousand (eleven.3 ft) width, its in-universe manufacturer are the Colicoids, the same species which produced Droideka.[31] They are more dangerous than Vulture droids thanks to an advanced heuristic droid brain which improve learns from enemy tactics and can be linked to coordinate multi-fighter attacks.[31] While non as fast equally a Jedi interceptor, the tri-fighter has iii independent thrusters to give information technology impressive agility. Four light amplification by stimulated emission of radiation cannons, one lite cannon on each arm and one nose-mounted medium cannon, tin can burn together or independently. It can likewise carry between two and half dozen missiles, including proton torpedoes, concussion missiles and buzz droids.[28]

Geonosian starfighter [edit]

Two Geonosian starfighters in the Kickoff Battle of Geonosis.

Geonosian Starfighters appear in the climactic Battle of Geonosis in Star Wars: Episode II – Assault of the Clones when they chase after a Democracy attack gunship conveying Anakin Skywalker (Hayden Christensen), Obi-Wan Kenobi (Ewan McGregor) and Padmé Amidala (Natalie Portman). The craft was also set up to appear in an air battle during which Commonwealth assail gunships attack a Geonosian airstrip just the scenes were ultimately cut.[32] The starfighter technically made its outset advent in the video game Star Wars: Jedi Starfighter which was released prior to the movie.[33]

Inside the Star Wars universe these craft were considered nimble fighters, working equally well in space or in an temper, and afforded the pilot a 360° field of view.[34] Formally known as the Nantex-class starfighter and produced by the Huppla Pasa Tisc Shipwrights Commonage, the Geonosian fighter is 9.8 1000 (32 ft) long, one.9 g (6 ft 3 in) broad and two.2 thou (seven ft 3 in) tall (excluding the cockpit chimera). In addition to a magnetically-suspended laser cannon turret, the fighter is equipped with 100 independently aiming narrow-beam tractor/repulsor projectors.[35] These projectors are used not just to grapple with other spacrcraft but to assistance maneuver the fighter by pulling or pushing against surrounding objects.[36] While these fighters are said to possess tremendous acceleration and maneuverability thanks to a unique engine mount (likewise magnetically suspended), few of these fighters are exported as they are designed specifically effectually Geonosian senses and dexterity to operate.[35]

Jedi starfighter [edit]

The Delta-vii Aethersprite-grade lite interceptors (better known equally "Jedi starfighters") announced in Star Wars Episode II: Attack of the Clones (2002), when Obi-Wan Kenobi (Ewan McGregor) travels via Jedi starfighter to Kamino to investigate the attempted assassination of Padmé Amidala (Natalie Portman); he also flies a Jedi starfighter to Geonosis in an attempt to track downwards the bounty hunter Jango Fett (Temuera Morrison). After, Plo Koon (Matt Sloan) flies a Jedi starfighter when he is shot downwards past clone troopers carrying out Emperor Palpatine'south (Ian McDiarmid) Lodge 66 in Revenge of the Sith (2005).[37] In the 2003 Clone Wars animated series, Anakin Skywalker is seen flying a customized Delta-7, called the Azure Affections, of which a Lego model was later made.[38]

The Jedi starfighter's triangular shape stems from the shape of Imperial Star Destroyers in the original Star Wars trilogy. Industrial Light & Magic designer Doug Chiang identified the Jedi starfighter as one of the showtime designs that bridges the artful between the prequel and original trilogies.[39] Chiang noted that viewers' familiarity with the Star Destroyer's advent and Imperial affiliation gives added symbolism to the Jedi craft's appearance and foreshadows the Empire'south rising to ability.[39] A full-scale model of the starfighter was also created for filming purposes. During scenes taking identify on the rain-swept landing pads of Kamino, the model had to exist painted and particularly prepared in social club to resist any water impairment.[twoscore]

Star Wars expanded universe cloth states that the Delta-vii was designed specifically with the Jedi's Force-aided reflexes in mind past stripping them down and making their controls as responsive as possible.[37] [41] Manufactured for the Jedi by Kuat Systems Technology, the starfighter measures but 8 m (26 ft) long, 3.92 grand (12.9 ft) wide and one.44 one thousand (4 ft 9 in) high, making it hard to discover. An astromech droid fits in an off-heart socket on the port side of the Delta-vii, just the tiny fighter'southward size requires the droid'south body be modified in order to fit (after Delta-7B models identify the socket in front of the cockpit to allow full-sized astromech units).[41] A pair of light amplification by stimulated emission of radiation cannons and deflector shielding allows the Jedi pilot to engage in combat, though ideally as a last resort. Defective an internal hyperdrive, the Jedi starfighter uses an external hyperspace transport wing to which it tin can adhere for faster-than-light travel. Its two Novaldex J-44 "Jetforce" sublight engines are equipped with electromagnetic thrust nozzles that focus and fourth dimension engine bursts to match the Jedi's abilities. This also makes the starfighter overwhelmingly difficult for a non-Jedi to airplane pilot. When the Jedi were destroyed later Order 66, Kuat Systems Applied science designed a new starfighter that would be more manageable for non-Jedi pilots: the A-wing.[41] [42]

Jedi interceptor [edit]

The Eta-2 Actis-class lite interceptors, also known equally "Jedi interceptors", made their first theatrical in Star Wars Episode Three: Revenge of the Sith (2005). In the opening space battle, Obi-Wan Kenobi (Ewan McGregor) and Anakin Skywalker (Hayden Christensen) airplane pilot Jedi interceptors on a mission to rescue Chancellor Palpatine (Ian McDiarmid) from Full general Grievous. The arts and crafts'due south design was purposefully meant to echo the before Jedi starfighter and the TIE Fighter, while its opening fly panels were influenced by a feature on Hasbro's toy model of the Jedi starfighter.[43] For filming shut-ups of the actors, a single full-scale model of the Jedi interceptor was created. Since Obi-Wan and Anakin's interceptors were individualized with their ain color schemes, each actor would perform their scenes separately and switch out, allowing the model to be redressed in betwixt.[44]

In-universe material states that this new starfighter was meant to aggrandize the Jedi'southward arsenal equally they establish themselves on the front lines of the Clone Wars, being smaller but possessing greater firepower than the before Delta-7 with twin laser cannons and twin ion cannons.[45] [46] [47] Also built by Kuat Systems Applied science, the Eta-2 is even smaller than the Delta-vii at only 5.47 m (17.9 ft) long, iv.iii m (14 ft) wide and 2.5 thousand (8 ft 2 in) loftier with wings deployed, though with plenty infinite for an astromech droid socket inside the port fly. It is likewise fifty-fifty more maneuverable with ii ion engines that can deflect thrust upwards to 30 degrees.[46] [47] The Eta-2 has no deflector shields or bulky flight controls in order to relieve weight and maximize speed and agility, instead relying on the Jedi's Force abilities to compensate. In lodge to manage heat levels, the interceptor is fitted with S-foils on the tip of each fly which open up to reveal radiator panels.[46] [47] [48] Later on the Jedi were destroyed during Order 66, the Eta-2 would serve equally the inspiration for the Galactic Empire's Tie Fighter.[48]

Naboo North-1 starfighter [edit]

The Naboo N-1 starfighter made its theatrical advent in Star Wars: Episode I – The Phantom Menace. During the climactic Battle of Naboo, a squadron of the fighters attacked the orbiting Trade Federation Droid Control Ship Saak'ak. Anakin Skywalker (Jake Lloyd) accidentally steals a Naboo Due north-i starfighter and pilots it into the Droid Command Transport's docking bay, destroying the vessel from the inside. N-one starfighters also appear in the beginning of Star Wars: Episode II – Assault of the Clones escorting senator Padmé Amidala's (Natalie Portman) Naboo Royal Cruiser upon its arrival to Coruscant. The N-1 also appears at the end of the edited and remastered 2004 "Special Edition" DVD version of Return of the Jedi. A modified N-1 starfighter appears in the Disney + series The Volume of Boba Fett (2022), built by Tatooine mechanic Peli Motto (Amy Sedaris) and used equally a replacement for Din Djarin'south (Pedro Pascal) destroyed Razor Crest. The fighter technically start appeared equally an unlockable vehicle in Star Wars: Rogue Squadron, which was released approximately six months before The Phantom Menace, and was available as a playable vehicle in the video games Star Wars: Battle for Naboo and Star Wars: Starfighter.

The N-1 initially had the same athwart blueprint as craft in the original Star Wars trilogy; only in later designs did it take on a streamlined appearance.[49] A life-size model of a Naboo starfighter hangs suspended from the ceiling of the Blue Wing at the Boston Museum of Science, in Boston, Massachusetts.[50] This 1:1 scale model was unveiled at the museum in Apr 2004, as a prelude to the Star Wars: Where Science Meets Imagination exhibit.[50] The model was previously used equally a prop during the filming of The Phantom Menace.[50]

Based on in-universe background material, the N-1'due south sleek design exemplifies the philosophy of art and function in Naboo technology.[51] At eleven k (36 ft) long, the starfighters are built past the Theed Palace Space Vessel Engineering science Corps using a number of standard components in a custom-built spaceframe. The chromium finish on the starfighter's frontward surfaces indicate its majestic condition equally an escort for Naboo's Queen. The "rat-tail" finial of the principal trunk serves dual roles as a loftier-voltage charge collector and receiver of encrypted information when the fighter is plugged in at the palace hangar, while the secondary finials comprise engine heat sinks.[52] Behind the pilot's cockpit, an astromech droid plugs in to perform in-flight navigation and maintenance, although the fighter is likewise equipped with a capable automatic pilot feature. Armament includes twin laser cannons and twin proton torpedo launchers with a capacity for 10 torpedoes.[51] [52]

In a 2018 a examination was conducted using the Autodesk Menstruation Pattern virtual wind tunnel programme to look at the aerodynamic properties of several Star Wars starfighter models. Of those models which were tested, the Northward-1 was found to be the most aerodynamic of all with a drag coefficient of .1, which while somewhat poor compared to the real-life .02 rating of the F-4E Phantom was significantly better than all other starfighters tested.[53] [54]

Porax-38 starfighter [edit]

The Porax-38 appears in Revenge of the Sith as a starfighter piloted by the native Utapauns during the Battle of Utapau. Although featured in a total 2-page spread in the Revenge of the Sith Incredible Cantankerous-Sections book, the fighter's role was significantly reduced in the final film. This was due to the fact that the P-38's digital model, being a late add-on to the moving picture, was not completed to the level originally planned, and and then was relegated to a background craft.[55]

Soulless One [edit]

The Soulless Ane was General Grievous' personal starfighter, a customized version of a Belbullab-22 starfighter, which made its kickoff theatrical appearance in Revenge of the Sith (2005). After Obi-Wan Kenobi (Ewan McGregor) defeated Full general Grievous on Utapau, he used Grievous' starfighter to escape from his clone troopers attempting to conduct out Lodge 66 and rendezvoused with Yoda and Senator Bond Organa (Jimmy Smits).[56]

Five-fly [edit]

The V-wing Fighter or Alpha-3 Nimbus-form Five-Wing fabricated its theatrical appearance in the Revenge of the Sith (2005), equally the Galactic Republic is formally transformed into the Galactic Empire. Originally, blitheness managing director Rob Coleman proposed that Necktie Fighters be featured to signify this transition, but George Lucas pointed out that (in the picture show's chronology) there were nineteen years between the events of Revenge of the Sith and the original Star Wars. Allowing additional time for the Necktie fighter to be introduced, a new starfighter was created instead, purposefully similar in both design and sound to the Necktie fighter while as well resembling the Jedi'southward Delta-vii starfighter.[57]

According to Star Wars canon, the V-fly's pattern combines elements of the ARC-170, V-19 and Delta-7, making it an platonic escort fighter.[58] Introduced by Kuat Systems Engineering science during the final days of the Clone Wars, the compact V-fly is just 7.nine m (26 ft) long and 3.8 one thousand (12 ft) wide, with its elevation expanding to five.84 k (19.2 ft) when the wings are deployed. An astromech droid assists the pilot with in-flight navigation and maintenance. Ii pairs of laser cannons on swivel mounts in the wing struts provide a rapid-fire offensive dial.[59] [lx] The V-fly is far more than maneuverable than the ARC-170, making it perfect for combating swarms of Tri-fighters and Vulture droids,[59] while a pair of powerful ion engines tin propel the fighter to a top atmospheric speed of 52,000 km/h (32,000 mph).[60] In order to save on weight to brand the fighter and so fast and maneuverable, it does non feature a hyperdrive or pressurized cockpit.[48] Additionally, folding wings on either side of the hull contain radiator panels to manage heat levels during intense activity.[59] [threescore]

Vulture Droid [edit]

The Vulture Droid or Variable Geometry Self-Propelled Battle Droid is a droid starfighter that made its theatrical appearance in The Phantom Menace (1999) every bit office of the Trade Federation's space fleet and appeared again, slightly dissimilar, in Revenge of the Sith (2005), as a Separatist space unit (likely coming from the Trade Federation, which sells its droid forces to the CIS, as established in Attack of the Clones). Original designs depicted the droid starfighter not equally a droid itself, only instead piloted past a battle droid.[61] In society to demonstrate that information technology was both a robotic existence every bit well every bit vehicle, information technology was decide to requite the vulture droid a transformative element, allowing its wings to fold downward and serve as legs. 2 18" maquettes of the vulture droid were built - one in ship mode and one in walking mode - to help create the digital model. In order to represent the thought of iii vulture droids sharing i "brain," animators purposefully linked the motion of each iii-ship flight when creating the climactic battle of The Phantom Menace.[62]

As per Star Wars sources, vulture droids were originally produced by the Eleven Char cathedral factories of Hoar Chall Engineering science for the Merchandise Federation before subsequently condign a mainstay of Separatist fighter squadrons during the Clone Wars.[28] [63] At 3.5 m (xi ft) long when in flying mode, these droid starfighters are designed to engage the enemy in overwhelming swarms, partially to overcome their lack of cunning and resourcefulness.[63] [64] Electromagnetic thrust-vectoring makes vulture droids elusive targets to hit, powered past concentrated solid fuel slugs which provide tremendous ability but with the drawback of express range. For armament the droid carries a pair of twin blaster cannons in the wings while two energy torpedo launchers are mounted in the main body; when the wings retract they muffle the blasters and protect them from microparticle and atmospheric corrosion. When necessary, the droid can uses its repulsorlifts to country and transform into a iv-legged walking configuration to occupy territory, angling its free energy torpedo launchers for antipersonnel use. Originally, vulture droids were controlled by a central command ship, but were afterwards given a limited degree of independence.[64]

A variant of the vulture droid is the Hyena Bomber Droid, with a larger, sturdier hull and larger wings. It also has a 2nd hull with downward-facing photoreceptors for precision bomb dropping.[65] The Hyena Bomber Droid made its starting time appearance in the 2008 Clone Wars telly series.

Starfighters appearing in other Star Wars media [edit]

E-wing [edit]

An improved successor to the X-wing, the Due east-wing first appeared in Dark Horse Comics' Dark Empire serial. They are one of few Expanded Universe vehicles to exist a part of Micro Machines' Action Fleet line.[66] Armed with three Taim & Bak IX9 Medium Light amplification by stimulated emission of radiation Cannons and two proton torpedo launchers, the E-wing's aerodynamic frame made the fighter highly maneuverable and exceptional in atmospheric flying. Its Class 1 Hyperdrive allowed for extended reconnaissance missions and rapid strategic redeployment. Every bit part of a larger force, the E-wing filled a versatile mid-range multirole combat aircraft or lite torpedo bomber.

Gauntlet Fighter [edit]

A Gauntlet Fighter, or Kom'rk-class fighter, is a Mandalorian class of ship. Larger than most starfighters, it tin can carry a larger crew and arrange passengers. They were introduced in Star Wars: The Clone Wars being used by the Mandalorian splinter group Deathwatch. Another one known as the Nightbrother later served as Darth Maul's personal craft in Star Wars Rebels. Kom'rk-course fighter/transports are equipped with four light amplification by stimulated emission of radiation cannons, a Class ane hyperdrive, and space to comport up to 24 soldiers. Ii versions of the starfighter model exist, i 68 m (223 ft) long and a smaller variant 52.3 grand (172 ft) long.[67] [68]

Fanblade starfighter [edit]

Asajj Ventress flies the fanblade in the animated Star Wars: Clone Wars series. But equally Ventress' appearance was inspired by a Samurai opinion, the ship itself has Asian influences: its design is based on a sensu folding fan.[69] Background literature refers to these every bit Ginivex-class fanblade starfighters, with only six built for Asajj'due south personal apply. xiii.i chiliad (43 ft) long, the starfighters' retractable solar sail helps make the ship extremely fast with a powerful deflector shield but also makes it easier to spot. It is also equipped with a Class ane hyperdrive and a rotating laser cannon mounted on either end of the solar sail.[70]

U-wing [edit]

UT-60D U-wing starfighter/support craft
Star Wars vehicle
Outset advent Rogue One: A Star Wars Story (2016)
Created by Incom Corporation
Information
Amalgamation
  • Rebel Alliance
  • New Democracy
General characteristics
Class Starfighter/Gunship/Troop ship
Armaments
  • Taim & Bak KX7 laser cannons (ii)
  • Infantry-based heavy weapons (up to 2, optional)
Defenses
  • Chempat deflector shield generator
Maximum speed
  • two,600 Yard (maximum acceleration)
  • 950 km/h (590 mph; maximum atmospheric speed)
  • 95 MGLT (megalight per hour; subluminal speed)
  • 1.0 HCR (hyperdrive class rating; superluminal speed)
Propulsion
  • Incom GBk-585 hyperdrive motivators (iv)
  • Incom 4J.vii fusial thrust engines (4)
Length 23.99 meters (78 ft 8 in)(S-foils forward)
Width eight.54 meters (28 ft) (S-foils frontwards)
Acme iii.51 meters (11 ft 6 in)
Population volume
  • 2 pilots
  • two door gunners (optional)
  • 8 passengers

The UT-60D U-wing starfighter/support arts and crafts is a Rebel troop transport/gunship model manufactured by Incom Corporation for the purpose of supporting special operations forces insertion and extraction into denied areas from strategic distances.[71] Used to penetrate enemy zones to drop off Insubordinate infantry, provide close air support, and excerpt them upon mission completion. U-wings first appeared in the picture Rogue One, where they were pivotal in the transport and protection of the Insubordinate Brotherhood's ground forces during the Boxing of Scarif.[72]

Origin and design

Director Gareth Edwards wanted Rogue I to be grounded in the aesthetics of the Korean or Vietnam War in order to contrast it with the more World War 2 expect of the original Star Wars film. Thus when it came time to design a unique send for the moving picture's heroes to travel around in, he wanted it to be akin to a "Huey" version of the 10-fly. While experimenting with dissimilar models and names ("Z-fly, R-wing, Q-wing, etc."), the final design picked was in part considering it looked similar an inverted Ten-wing. For filming interior scenes, a total-size U-wing cockpit was built and mounted on a manually controlled gimbal in front of a wall of LED panels. The panels were used instead of traditional movie lights so that more than natural lighting could be simulated.[73]

Delineation

In-universe cloth states that the UT-60 was the final starfighter design created by Incom Corporation before the company was nationalized by the Galactic Empire. Originally intended as a transport ship for couriers and planetary defence forces, the last of the UT-60D starfighters to be built were secured for the Rebel Alliance cheers to the efforts of Senator Bail Organa (Jimmy Smits). Rebel mechanics and technicians transformed their U-wings into sturdy gunships and troop transports for Rebel Alliance Special Forces (SpecForces) making dangerous insertions into Imperial territory. The U-wing's engine configuration was inspired in part by the X-wing, and like the X-wing featured S-foils merely in a variable-sweep wing format, opening them to improve atmospheric maneuverability and overstate its deflector shield. However the ship was not designed for the tight turns necessary for dogfights, and while the U-wing did feature a hyperdrive for faster-than-light travel, extended operations with a full passenger compliment would quickly deplete the vessel's life support systems. The U-wing's two laser cannons could exist supplemented by a pair of infantry heavy weapons handled past dedicated door gunners.[74]

V-19 Torrent [edit]

The V-19 Torrent starfighter commencement appeared in the 2003 Clone Wars animated serial and take appeared in other media related to the Clone Wars. Background material states the V-xix had impressive speed and maneuverability, making it a catchy starfighter to fly. Information technology had iii Southward-foils that functioned like those on the 10-wing and was equipped with two light amplification by stimulated emission of radiation cannons and twin concussion missile launchers.[28] [75] At the kickoff of the Clone Wars, V-xix starfighters did not have hyperdrives for faster-than-calorie-free travel, instead relying on external hyperspace send rings to which they would attached. Subsequently models were modified to be equipped with an internal hyperdrive.[76]

Z-95 Headhunter [edit]

The Z-95 Headhunter is a class of starfighter which was first described in the Brian Daley's 1979 novel Han Solo at Stars' Terminate equally having swing-wings and a chimera cockpit.[77] In the 1980–81 comic strip adaptation, they are depicted like triangular, twin-tailed airplanes.[77] [78] Information technology was next depicted in Tatooine Manhunt (1988), an gamble book for Star Wars: The Roleplaying Game, with artwork based on an early Joe Johnston production sketch.[77] At least equally early equally A Guide to the Star Wars Universe (1994), it was established that the Z-95 was the precursor to the X-wing.[79] The Z-95 is featured variously in the Expanded Universe, including the X-wing: Rogue Squadron comic series (c.  1996–1997), as well as in 2008's The Clone Wars television serial, in which it is used by the Galactic Commonwealth.

The Z-95 Headhunter is described in the Star Wars Databank as a versatile snub-fighter despite existence outdated at the time of the Clone Wars.[80] Incom Corporation originally designed the Z-95 for planetary defence force forces, and while lacking many features similar a hyperdrive or astromech droid it was appreciated for its armaments and internal ecology controls. The Republic commissioned upgraded models of the Z-95 for their clone pilots which featured more than powerful weaponry and deflector shields, as well equally superior endurance and adaptability.[29] At the beginning of the one-shot comic Historic period of Resistance: Rose Tico, a young Paige and Rose Tico find out who is a meliorate pilot of the Z-95.

Encounter likewise [edit]

  • List of Star Wars spacecraft
  • Star Wars planetary vehicles
  • Weapons in scientific discipline fiction

Bibliography [edit]

  • Barr, Tricia; Bray, Adam; Horton, Cole; Horton (2017). Star Wars: The Visual Encyclopedia. United States: DK Publishing. ISBN978-ane-4654-5962-6.
  • Barr, Patricia; Bray, Adam; Jones, Matt; Horton, Cole; Wallace, Daniel; Windham, Ryder (2019). Ultimate Star Wars New Edition. United States: DK Publishing. ISBN978-1-4654-7900-6.
  • Dougherty, Kerrie; Fry, Jason; Hidalgo, Pablo; Reynolds, David West; Saxton, Curtis; Windham, Ryder (2020). Star Wars Consummate Vehicles New Edition. United states: DK Publishing. ISBN978-0-7440-2057-ane.
  • Luceno, James; Reynolds, David W; Windham, Ryder; Fry, Jason; Hidalgo, Pablo (2018). Star Wars: The Complete Visual Dictionary. The states: DK Publishing. ISBN978-ane-4654-7547-3.
  • Walker, Landry Q. (2018). Star Wars Encyclopedia of Starfighters and Other Vehicles. United States: DK Publishing. ISBN9781465482716.
  • Windham, Ryder (2019). Star Wars Insubordinate Starfighters Possessor'south Workshop Transmission. United States: Insight Editions. ISBN978-i-68383-936-1.
  • Windham, Ryder (2018). Star Wars YT-1300 Millennium Falcon Owner's Workshop Transmission. United States: Insight Editions. ISBN978-1-68383-528-8.

References [edit]

  1. ^ a b c Dougherty, et al. (2020), p. 256-257
  2. ^ Barr, et al. (2017), p. 132
  3. ^ Windham (2018), p. 70
  4. ^ Windham (2018), p. 72
  5. ^ Barr, et al. (2017), p. 186
  6. ^ Barr, et al. (2017), p. 161
  7. ^ Barr, et al. (2017), p. 171
  8. ^ Windham (2018), p. 82
  9. ^ "A-wing Fighter History Gallery". StarWars.com. Lucasfilm. Click on image three of 6. Retrieved June seven, 2016.
  10. ^ a b c Windham (2019), p. 35-47
  11. ^ a b "B-wing starfighter (Behind the Scenes)". Star Wars Databank. Lucasfilm. Archived from the original on September 30, 2007. Retrieved August 25, 2007.
  12. ^ "B-wing Prototype (Blade Wing)". StarWars.com.
  13. ^ Slavicsek, Neb (1994). A Guide to the Star Wars Universe (rev. and expanded ed.). Ballantine Books. p. 372. ISBN9780345386250.
  14. ^ "B-wing starfighter". Star Wars Database. Lucasfilm. Retrieved February 8, 2020.
  15. ^ "B-Fly Fighter: Box Front". SirStevesGuide.com Photo Gallery. sirstevesguide.com. Archived from the original on September 28, 2007. Retrieved August 25, 2007.
  16. ^ "Dude, Where's my ship". Star Wars Collecting. Lucasfilm. Archived from the original on September thirty, 2007. Retrieved August 25, 2007.
  17. ^ "#Nine: Executor, B-wing, A-wing (1995)". Star Wars Cargo Bay. Lucasfilm. Archived from the original on Nov 13, 2007. Retrieved Baronial 25, 2007.
  18. ^ "#3: AT-ST, Jabba's Sail Barge, B-fly (1994)". Star Wars Cargo Bay. Lucasfilm. Archived from the original on August 17, 2007. Retrieved August 25, 2007.
  19. ^ "FBTB Lego Star Wars Set Guide - 7180 B-Wing Fighter". Archived from the original on September 27, 2007. Retrieved August 29, 2007.
  20. ^ "LEGO Releases Obi-Wan's Starfighter in Target Exclusive Set This Fall". Star Wars Collecting. Lucasfilm. Archived from the original on March 15, 2007. Retrieved August 25, 2007.
  21. ^ "UCS B-Wing revealed today at Brick Fiesta in Houston, TX". Retrieved July ix, 2012.
  22. ^ "B-wing Fighter". Star Wars Cargo Bay. Lucasfilm. Archived from the original on November 13, 2007. Retrieved Baronial 25, 2007.
  23. ^ "Star Wars Customizable Bill of fare Game Consummate Card List" (PDF). Decipher, Inc. August 23, 2001. Archived from the original (PDF) on September 28, 2007. Retrieved August 23, 2007.
  24. ^ "B-fly". Star Wars Cargo Bay. Lucasfilm. Archived from the original on August 8, 2007. Retrieved August 25, 2007.
  25. ^ "ARC-170 starfighter". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  26. ^ Walker, Landry (2019). The Moviemaking Magic of Star Wars: Ships & Battles. The states: Harry North. Abrams. p. 97. ISBN9781419736339.
  27. ^ a b c d eastward f Dougherty, et al. (2020), p. 82-83
  28. ^ a b c d east Star Wars: On the Front Lines. Titan Books. 2017. ISBN978-1785652141.
  29. ^ a b Windham (2019), pp. 50–51
  30. ^ "droid tri-fighter (Behind the Scenes)". Lucasfilm. Archived from the original on Dec 15, 2007. Retrieved October xvi, 2007.
  31. ^ a b Dougherty, et al. (2020), p. 88-89
  32. ^ "Geonosian starfighter". Star Wars Databank. Lucasfilm. Archived from the original on December xv, 2007. Retrieved October 16, 2007.
  33. ^ Walker (2019), p. 90
  34. ^ "Geonosian starfighter". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  35. ^ a b Dougherty, et al. (2020), p. 66-67
  36. ^ Dougherty, et al. (2020), p. 76
  37. ^ a b "Jedi starfighter". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  38. ^ Becraft, A., Malloy, C. (2017). Ultimate LEGO Star Wars. U.s.: DK Publishing. p. 303
  39. ^ a b "Wedgie 'Em Out". Making Episode II Webdocs. Lucasfilm. Archived from the original (QuickTime video) on January 12, 2006. Retrieved December 25, 2007.
  40. ^ Walker (2019), p. 86
  41. ^ a b c Dougherty, et al. (2020), p. 56-56
  42. ^ Windham (2019), p. 23
  43. ^ "Eta-2 Jedi Starfighter (Behind the Scenes)". Lucasfilm. Archived from the original on October 12, 2007. Retrieved June 22, 2020.
  44. ^ Walker (2019), p. 96
  45. ^ "Eta-2 Jedi Starfighter". Lucasfilm. Retrieved June 22, 2020.
  46. ^ a b c Dougherty, et al. (2020), p. 84-85
  47. ^ a b c Barr, et al. (2019), p. 308
  48. ^ a b c Tie Fighter Owners' Workshop Manual. Insight Editions. 2019. ISBN978-1785212239.
  49. ^ "Naboo N-1 Starfighter (Behind the Scenes)". Star Wars Databank. Lucasfilm. Retrieved December three, 2007.
  50. ^ a b c "Naboo Starfighter Unveiled for Museum Exhibit". StarWars.com: Customs News. Lucas Online. Apr xiv, 2004. Archived from the original on Dec 30, 2006. Retrieved February 17, 2007.
  51. ^ a b Barr, et al. (2019), p. 295
  52. ^ a b Dougherty, et al. (2020), p. 42-44
  53. ^ Pockross, Adam. "Testing the Aerodynamics of Star Wars Ships in a Virtual Wind Tunnel". SyFy Wire . Retrieved September 9, 2020.
  54. ^ Limer, Eric (June xix, 2018). "Which Star Wars Ships Take the Best (and Worst) Aerodynamics?". Popular Mechanics . Retrieved September ix, 2020.
  55. ^ "P-38 starfighter (Behind the Scenes)". Star Wars Databank. Lucasfilm. Archived from the original on December xv, 2007. Retrieved Oct xiv, 2007.
  56. ^ "Soulless 1". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  57. ^ Walker (2019), p. 1010
  58. ^ "V-wing starfighter". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  59. ^ a b c Dougherty, et al. (2020), p. 81
  60. ^ a b c Barr, et al. (2019), p. 310
  61. ^ "droid starfighter (Behind the Scenes)". Lucasfilm. Archived from the original on December xv, 2007. Retrieved October 16, 2007.
  62. ^ Walker (2019), p. 71
  63. ^ a b Dougherty, et al. (2020), p. 34-35
  64. ^ a b "Vulture Droid (Droid Starfighter)". Star Wars Databank. Lucasfilm. Retrieved July 7, 2020.
  65. ^ "Hyena Bomber Droid". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  66. ^ "E-wing starfighter". Star Wars Databank. Lucasfilm. Archived from the original on Dec fifteen, 2007. Retrieved October 16, 2007.
  67. ^ Barr, et. al. (2019), p. 324
  68. ^ Landry (2018), p. 102
  69. ^ "Geonosian fanblade starfighter (Behind the Scenes)". Star Wars Databank. Lucasfilm. Archived from the original on December 15, 2007. Retrieved Oct 16, 2007.
  70. ^ Landry (2018), p. 93
  71. ^ ""Weird Al" Yankovic Interview, New Rogue One Vehicle Revealed, and More".
  72. ^ "Rogue One: A Star Wars Story Official Site - StarWars.com". StarWars.com.
  73. ^ Walker (2019), p. 114
  74. ^ Windham (2019), p. 67-79
  75. ^ "5-19 Torrent". Star Wars Databank. Lucasfilm. Retrieved June 22, 2020.
  76. ^ Windham (2019), p. 37
  77. ^ a b c "Z-95 Headhunter". Star Wars Databank. Lucasfilm. Archived from the original on September 10, 2011. Retrieved June 17, 2020.
  78. ^ Goodwin, Archie (2018). Mullaney, Dean (ed.). Star Wars: The Consummate Classic Newspaper Comics, Vol. 2. Handley, Rich (intro). San Diego: IDW Publishing. pp. 18–21. ISBN978-1684050536. OCLC 1028640914.
  79. ^ Slavicsek, Bill (1994). A Guide to the Star Wars Universe (rev. and expanded ed.). Ballantine Books. p. 491. ISBN9780345386250.
  80. ^ "Z-95 Headhunter". Star Wars Databank. Lucasfilm. Retrieved June 23, 2020.

External links [edit]

  • Index of Starship department of the Star Wars Encyclopedia - Includes several starfighters
  • Category:Starfighters on Wookieepedia, a Star Wars wiki
  • Intricate Illustrations of Star Wars Spacecraft Cutouts Reveal Their Inner Mechanics by Leah Pellegrini April 23, 2016

sheffieldobtlyn.blogspot.com

Source: https://en.wikipedia.org/wiki/List_of_Star_Wars_starfighters

Entradas que pueden interesarte

Publicar un comentario for "Why Did the Cis Never Use Ion Cannons Again"